RB4011iGS+5HacQ2HnD-IN

$360.00
Write a Review
SKU:
RB4011iGS+5HacQ2HnD-IN
Architecture:
ARM 32bit
CPU:
AL21400
CPU core count:
4
CPU nominal frequency:
1.4 GHz
RouterOS License level:
5
Size of RAM:
1GB
Storage size:
512MB
Storage Type:
NAND
Tested ambient temperature:
-40C .. +70C
Number of AC inputs:
1
AC input range:
100-240v
Max power consumption:
33W
10/100/1000 Ethernet ports:
10
SFP+ ports:
1
Serial port:
RJ45
Max USB current (A):
1
PCB temperature monitor:
Yes
Voltage monitor:
Yes
Wireless Standards for 5GHz:
802.11a/n/ac
Wireless Standards for 2.4GHz:
802.11b/g/n
Antenna gain for 5GHz:
3 dBi
Antenna gain for 2.4GHz:
3 dBi
Maximum data rates for 5GHz:
1733 Mbps
Maximum data rates for 2.4GHz:
300Mbps
Number of chains for 5GHz:
4
Number of chains for 2.4GHz:
2

RB4011 series - amazingly powerful routers with ten Gigabit ports, SFP+ 10Gbps interface and IPsec hardware acceleration for a great price!

The RB4011 uses a quad core Cortex A15 CPU, same as in our carrier grade RB1100AHx4 unit. The unit is equipped with 1GB of RAM, can provide PoE output on port #10 and comes with a compact and professional looking solid metal enclosure in matte black.

RB4011iGS+5HacQ2HnD-IN (WiFi model) is dual band, four chain unit with a supported data rate of up to 1733 Mbps in 5GHz. For legacy devices, the unit also has a dual chain 2GHz wireless card installed in miniPCI-e slot.

Note: The RB4011 does not support Passive DAC modules and SFP GPON modules

Ethernet test results

RB4011iGS+5HacQ2HnD-IN AL21400 1G/S+ all port test
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 806,4 9,792.9 2312,9 9,473.6 5509,7 2,821.0
Bridging 25 bridge filter rules 806,4 9,792.9 1037,4 4,249.2 1153,2 590.4
Routing none (fast path) 806,4 9,792.9 1923,3 7,877.8 5092,3 2,607.3
Routing 25 simple queues 806,4 9,792.9 1046,6 4,286.9 960,3 491.7
Routing 25 ip filter rules 593,7 7,209.9 625,2 2,560.8 564,6 289.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results

IPsec test results

RB4011iGS+5HacQ2HnD-IN AL21400 IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 140.8 1577.0 141.2 578.4 139.9 71.6
256 tunnels AES-128-CBC + SHA1 192.7 2158.2 200.5 821.2 203.4 104.1
256 tunnels AES-128-CBC + SHA256 192.4 2154.9 200.5 821.2 203.4 104.1
256 tunnels AES-256-CBC + SHA1 180.0 2016.0 188.2 770.9 190.3 97.4
256 tunnels AES-256-CBC + SHA256 180.0 2016.0 188.2 770.9 190.3 97.4
256 tunnels AES-128-GCM 192.7 2158.2 202.2 828.2 203.4 104.1
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results