CCR1072-1G-8S+

$4,900.00
Write a Review
SKU:
CCR1072-1G-8S+
Architecture:
TILE
CPU:
TLR4-07280DG-10CE-A0a
CPU core count:
72
CPU nominal frequency:
1 GHz
Dimensions:
443x315x44mm
License level:
6
Operating System:
RouterOS
Size of RAM:
16 GB
Storage size:
128 MB
Storage type:
NAND
Tested ambient temperature:
-20C .. +60C
Max Power consumption:
125W
Number of AC inputs:
2
AC input range:
100-240
10/100/1000 Ethernet ports:
1
SFP+ ports:
8
Memory card type:
microSD, 2x M.2
Memory Cards:
3
Serial port:
RJ45
Number of USB ports:
2
USB Power Reset:
Yes
USB slot type:
microUSB type AB; USB type A
Max USB current (A):
1
Smart card slot:
Yes
CCR1072-1G-8S+

The new MikroTik flagship router, the CCR1072, is powered by a Tilera 72 core CPU, each core is clocked at 1GHz, and to fully utilize this power, the CCR1072 is equipped with eight independently connected 10G SFP+ ports and single Ethernet port for management purposes.

The unit comes equipped with installed RouterOS L6, 16GB of built in ECC RAM, touchscreen color LCD, two removable (hotplug) power supplies for redundancy, smart card slot, microUSB, regular size USB, microSD and 2x M.2 slots for additional storage.

Thanks to the unique 72 core processor and ports that are directly connected to the CPU, CCR1072 is capable of over 120 million packets per second throughput.

 

Ethernet test results

CCR1072-1G-8S+ Tile 72 Core (1200Mhz, DDR1333) Max possible throughput
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 119,047.6 60,952.4
Bridging 25 bridge filter rules 6,130.5 74,448.8 8,192.7 33,557.3 10,339.5 5,293.8
Routing none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 86,507.0 44,291.6
Routing 25 simple queues 6,502.0 78,960.3 12,370.4 50,669.2 13,474.2 6,898.8
Routing 25 ip filter rules 4,667.6 56,683.3 5,985.1 24,515.0 5,873.8 3,007.4
CCR1072-1G-8S+ Tile 72 Core (1200Mhz, DDR1600) Max possible throughput
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 119,047.6 60,952.4
Bridging 25 bridge filter rules 6,502.0 78,960.3 9,099.2 37,270.3 10,432.3 5,341.3
Routing none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 94,668.4 48,470.2
Routing 25 simple queues 6,502.0 78,960.3 13,500.0 55,296.0 13,683.5 7,006.0
Routing 25 ip filter rules 5,247.6 63,726.9 6,125.5 25,090.0 6,104.0 3,125.2
CCR1072-1G-8S+ Tile 72 Core (1000Mhz, DDR1333) Max possible throughput
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 98,801.0 50,586.1
Bridging 25 bridge filter rules 5,033.3 61,124.4 7,149.8 29,285.6 8,682.1 4,445.2
Routing none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 73,061.0 37,407.2
Routing 25 simple queues 6,502.0 78,960.3 10,980.3 44,975.3 11,368.2 5,820.5
Routing 25 ip filter rules 4,125.6 50,101.3 5,051.5 20,690.9 4,999.0 2,559.5
CCR1072-1G-8S+ Tile 72 Core (1000Mhz, DDR1600) Max possible throughput
Mode Configuration 1518 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Bridging none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 98,873.5 50,623.2
Bridging 25 bridge filter rules 5,764.8 70,007.7 8,240.2 33,751.9 8,866.3 4,539.5
Routing none (fast path) 6,502.0 78,960.3 18,790.0 76,963.8 76,201.0 39,014.9
Routing 25 simple queues 6,502.0 78,960.3 11,073.5 45,357.1 11,444.4 5,859.5
Routing 25 ip filter rules 4,664.7 56,648.1 5,200.3 21,300.4 5,321.0 2,724.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1518 byte packet sizes
  3. Values in Italic indicate that max throughput was reached without maxing out CPU, but because board interface configuration was maxed out
  4. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results
 

IPsec test results

CCR1072-1G-8S+ CCR1072-1G-8S+ IPsec throughput
Mode Configuration 1400 byte 512 byte 64 byte
kpps Mbps kpps Mbps kpps Mbps
Single tunnel AES-128-CBC + SHA1 112.5 1260.0 112.6 461.2 115.4 59.1
256 tunnels AES-128-CBC + SHA1 970.8 10873.0 1096.5 4491.3 1190.5 609.5
256 tunnels AES-128-CBC + SHA256 906.1 10148.3 1082.8 4435.1 1163.0 595.5
256 tunnels AES-256-CBC + SHA1 904.4 10129.3 1051.0 4304.9 1190.5 609.5
256 tunnels AES-256-CBC + SHA256 895.9 10034.1 1078.3 4416.7 1135.5 581.4
  1. All tests are done with Xena Networks specialized test equipment (XenaBay),and done according to RFC2544 (Xena2544)
  2. Max throughput is determined with 30+ second attempts with 0,1% packet loss tolerance in 64, 512, 1400 byte packet sizes
  3. Test results show device maximum performance, and are reached using mentioned hardware and software configuration, different configurations most likely will result in lower results